New JN0-363 Test Review - JN0-363 Latest Test Dumps

P.S. Free & New JN0-363 dumps are available on Google Drive shared by Lead1Pass: https://drive.google.com/open?id=1nPu53ECHB_97L9VXXZJM12pmEcuy5Xs-

Why we are ahead of the other sites in the IT training industry? Because the information we provide have a wider coverage, higher quality, and the accuracy is also higher. So Lead1Pass is not only the best choice for you to participate in the Juniper Certification JN0-363 Exam, but also the best protection for your success.

Juniper JN0-363 Exam is a challenging certification that requires a high level of expertise in service provider routing and switching. It is a valuable certification for network engineers, architects, and administrators who work in service provider environments. Earning this certification demonstrates a candidate's commitment to their profession and their ability to provide high-quality solutions to complex network challenges.

>> New JN0-363 Test Review <<

Perfect New JN0-363 Test Review | Amazing Pass Rate For JN0-363 Exam | High Pass-Rate JN0-363: Service Provider Routing and Switching, Specialist (JNCIS-SP)

JN0-363 answers real questions can help candidates have correct directions and prevent useless effort. If you still lack of confidence in preparing your exam, choosing a good JN0-363 answers real questions will be a wise decision for you, it is also an economical method which is saving time, money and energy. Valid JN0-363 Answers Real Questions will help you clear exam at the first time, it will be fast for you to obtain certifications and achieve your dream.

Juniper JN0-363 Exam Certification Details:

Exam Price	$300 USD
Exam Registration	PEARSON VUE
Number of Questions	65
Exam Name	Service Provider Routing and Switching Specialist
Sample Questions	Juniper JN0-363 Sample Questions
Recommended Training	Junos Intermediate Routing (JIR) Junos Service Provider Switching (JSPX) Junos MPLS Fundamentals (JMF)

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q84-Q89):

NEW QUESTION # 84
Which two statements are correct about the way that BGP propagates routes by default? (Choose two.)

A. A route learned by IBGP will not be re-advertised lo IBGP peers.
B. A route learned by EBGP will not be re-advertised to IBGP peers.
C. A route learned by IBGP will be re-advertised to IBGP peers.
D. A route learned by EBGP will be re-advertised to IBGP peers.

Answer: A,D

Explanation:
By default, BGP will propagate routes learned from EBGP peers to other IBGP peers. However, due to the BGP split-horizon rule, routes learned from one IBGP peer are notre-advertised to another IBGP peer. This behavior is designed to prevent routing information loops within the same AS.
References:
Juniper Networks documentation on BGP: BGP Route Propagation and Selection

NEW QUESTION # 85
Which IPv6 address type is used as an identifier for a group of IPv6 interfaces that might belong to different nodes, typically, the nearest node?

A. broadcast
B. multicast
C. unicast
D. anycast

Answer: D

NEW QUESTION # 86
You have been asked to use a convention that allows for auto configuration of interface addresses.
You are not allowed to use DHCPv6. What do you do?

A. Use IPv4 with the autoconfig option under family inet.
B. Use a program (e.g. Vector-Wiz) to auto configure IP addresses.
C. Use an IPv6 static configuration.
D. Use IPv6 in the network to configure hosts.

Answer: D

NEW QUESTION # 87
You have an established LSP between your R1 and R5 devices using the configuration shown in the exhibit. You are asked to ensure that MPLS labels are used to forward traffic by all devices within the LSP.
Which action will accomplish this behavior?

A. Delete the no-cspf statement under the R1_TO_R5 label switched path on R1.
B. Configure the install statement under the R1_TO_R5 label switched path on R1.
C. Configure the ultimace-hop-popping statement under the R1_TO_R5 label switched path on R1.
D. Configure the explicit-null statement under the protocol mpls hierarchy on R1.

Answer: B

Explanation:
https://www.juniper.net/documentation/us/en/software/junos/mpls/topics/ref/statement/install-edit-protocols-mpls.html

NEW QUESTION # 88
Click the Exhibit.

Referring to the exhibit, the GRE tunnel between R-1 and R2 allows connectivity between User-1 and Server-1. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size.
However, if the packet size is larger than 1448, User-1 cannot communicate with Server-1.
In this scenario, how do you solve the communication problem?

A. Change the physical MTU on the ge-0/0/3 interfaces on R-1 and R-2 to 1448 bytes.
B. Apply the allow-fragmentation statement to the GRE tunnel configuration.
C. Apply the path-mtu-discovery statement to the GRE tunnel configuration.
D. Change the physical MTU on the gr-0/0/0 interfaces on R-1 and R-2 to 1448 bytes.

Answer: B

NEW QUESTION # 89
......

JN0-363 Latest Test Dumps: https://www.lead1pass.com/Juniper/JN0-363-practice-exam-dumps.html

2025 Latest Lead1Pass JN0-363 PDF Dumps and JN0-363 Exam Engine Free Share: https://drive.google.com/open?id=1nPu53ECHB_97L9VXXZJM12pmEcuy5Xs-